Step-by-Step Guide: How to Successfully Move and Reassemble Your Sleep Number Bed

Step-by-Step Guide: How to Successfully Move and Reassemble Your Sleep Number Bed

Moving a Sleep Number bed might seem like a daunting task. But don’t worry, it’s not as complicated as it might appear. With a little know-how, you’ll be able to disassemble, move, and reassemble your bed in no time.

This guide is designed to simplify the process for you. Whether you’re moving across town or just to another room, we’ve got you covered. Let’s dive in, and you’ll see just how easy it can be to move your Sleep Number bed.

Key Takeaways

  • Moving a Sleep Number bed requires a systematic approach to ensure a smooth process: disassembling, preparing for moving, transportation, and reassembling.
  • Have the necessary tools ready before disassembly. These include the bed’s owner’s manual, a hex wrench, a screwdriver, pliers, ziplock bags (for part storage), including a camera and a measuring tape.
  • The bed’s disassembly process must be handled carefully. After referring to the manual, start by disconnecting the bed from the power source, deflate the mattress, and begin dismantling the bed into parts (mattress cover, hoses, air chambers) while making sure everything is labeled properly.
  • Prepare the disassembled bed parts for moving ensuring that all parts (air chambers, the pump, remote control, air hoses) are packed securely. The air chambers should be entirely deflated, and all parts, especially the high-value ones should be handlled with care.
  • For transporting, consider hiring professional movers or move yourself with a suitably large vehicle. Larger bed parts should be loaded first, and delicate components, last. Maintain caution throughout.
  • Finally, while reassembling, ensure all parts have arrived safely, follow your manual/Pictures taken during disassembly. Like a puzzle, start with the bed frame, set up the foam border walls, install the air chamber(s), foam comfort pad, and the firmness control system before capping it off with the mattress-top. Exercise patience throughout the process.

When moving a Sleep Number bed, it’s crucial to understand the disassembly and reassembly process to ensure no damage occurs. Sleep Number offers official guidance on how to move these beds, including optional technician support. If you are moving a Sleep Number FlexFit base, helpful YouTube tutorials explain how to disassemble and reassemble the base safely.

Gather the necessary tools

Gather the necessary tools

Before embarking on the disassembling process of your Sleep Number bed, it’s crucial that you gather all the necessary tools. Preparation is key here and having the correct tools on hand will expedite the task, ensuring a smoother process.

First and foremost is the owner’s manual. This guide provides you with the step-by-step process of how to safely and properly disassemble your bed. If you’ve misplaced your manual, don’t fret. It’s a common occurrence and the company has made the digital version available on their website for free download.

Next, you’ll need a 3/16″ hex wrench. This tool is specific to your sleep number bed’s assembly and disassembly. It’s essentially the key to unlocking your unit.

For your convenience, consider having a set of pliers and a screwdriver. Although not necessary, these tools can make your dismantling process easier and quicker.

Last but not least, get yourself a number of ziplock bags. These will come in handy for storing all the disassembled parts, ensuring none go astray in transit. Label each bag for ease of reassembling.

In addition to the tools mentioned above, it’s wise to have measuring tape and a camera handy. Measure the dimensions of your disassembled bed parts to ensure they’ll fit through doorways or in your moving truck. The camera will assist in taking pictures of the disassembly process. These shots can serve as a helpful guide when it’s time to put your bed back together.

By having these tools ready and within reach, you’re well prepared to begin the disassembly process of your Sleep Number bed. Remember not to rush and take breaks if needed. Disassembling your bed safely and properly is paramount to prevent any damage during the move.

The next section will take you deeper into the steps of how to disassemble a Sleep Number bed, starting from removing the mattress cover and on to the workforce behind your comfortable sleep – the air chambers and the air pump.

Understand the disassembly process

Understand the disassembly process

Getting a handle on taking your Sleep Number bed apart is vital before roll-up-your-sleeve time. Jumping right in without a plan? You’ll be asking for confusion and unnecessary hassle. Keep in mind that a methodical process isn’t an option – it’s a necessity.

Your first step? Reviewing that owner’s manual you’ve gathered. Look up the specific instructions for your bed model. Can’t find your manual? No sweat – you can search for your specific model’s instructions on the Sleep Number website.

After you’ve reviewed the disassembly instructions, start by unplugging your Sleep Number bed from the power source. It’s a simple move but it’ll ensure your safety during the process. Next, deflate the mattress using the remote to avoid any damage.

Now comes the real work: taking the bed apart. Begin with removing the mattress cover, followed by detaching the hoses from the mattress. Don’t forget to cap them after you remove them. This will keep the air chambers from inflating while you transport the bed.

Make sure to label the parts as you disassemble. You’ll thank yourself later. Capturing photos of sections as you go along can be a lifesaver too. This will help jog your memory during reassembly. Plus, there’s no such thing as too many reminders, right?

Lastly, disassemble the bed frame. It may seem straightforward but here is where your hex wrench and your screwdriver come in handy. Your bed frame consists of several components including the headboard, footboard, side rails, and center support beams. Use the tools to remove screws and bolts holding these parts together.

You’ve made great strides so far. But remember it’s essential to be patient, methodical, and careful. Your aim is to move your Sleep Number bed without damaging it. Let’s continue with our process.

Prepare the bed for moving

Prepare the bed for moving

Once you’ve successfully disassembled your Sleep Number bed, the next step in the process is preparing it for moving. Proper preparation is vital to ensure minimum disruption to your bed’s components. Tackle this step in an organized, systematic manner. Stepping into this phase without a plan could potentially result in damage to your cherished sleep aid.

Let’s start by identifying the critical components of the Sleep Number bed. The real strength of the bed lies in its adjustability, and the majority of this functionality is due to its air chambers. Key parts of this bed include:

  • Dual air chambers
  • Pump
  • Remote control
  • Air hoses

Securing the Air Chambers is an essential step in this phase. Ensure that the air chambers are completely deflated before moving. Once deflated, roll them up carefully and tuck them into a strong box or suitcase.

As for the Pump and Remote Control, consider wrapping them individually in bubble wrap, placing them snugly into a sturdy box. These are delicate, high-value components, and they deserve extra care.

Air Hoses are often overlooked during moving. It’s critical not to put any undue pressure on them as they are quite susceptible to bending and kinking. Coil these up neatly and store them carefully in a box separate from heavier objects.

Focus on protecting the mattress and fabric components. Remember, cleanliness is significant. Use a mattress cover or a large enough plastic wrap to encase the mattress. Keep the fabric parts clean and safe against potential spillage or soiling during handling or transportation.

Finally, remember, your patience and careful handling are invaluable throughout this process. Always take the time to protect each component adequately. Such care will ensure your Sleep Number bed arrives at its new location in peak condition, ready for reassembly, without any hiccups.

Safely transport the bed to the new location

Now that you’ve meticulously prepared your Sleep Number bed for moving, it’s time to focus on a crucial step – safely transporting the bed to your new location. This phase calls for extra caution since this is when your disassembled components are most vulnerable to damage.

One great way to safely transport your bed parts is using professional movers. They’re well trained and have a wealth of experience in handling delicate items, ensuring the bed components arrive safely at your destination. However, this option might be a bit pricey. If you’re tight on budget, self-moving is perfectly feasible provided you’re methodical and cautious.

When you’re self-moving, choosing the correct vehicle for transporting your bed is crucial. Avoid vehicles with small interiors such as compact cars. Instead, go for vans, large SUVs, or pickup trucks. These options offer ample space, which accommodates the large sizes of some bed components such as the mattress and fabric modules.

Let’s talk about packing order. This is a game of Tetris, where every piece fits perfectly into a specific place. Start by loading larger components such as the mattress and foundation panels. Make sure they are flat and secure. Then, fit in medium-sized parts like the fabric modules. Last to load are the most delicate components such as the pump, remote control, and air hoses. Secure them so they don’t move during transportation.

The most important thing to remember: Handle with Care! Every single part of your Sleep Number bed is important and should be treated with gentleness and respect. As you load, drive, and unload the vehicle, take extra care to avoid knocking or dropping any components. It’s all about being patient, meticulous, and mindful of every detail.

Keeping these tips in mind, you’re ready to make your move. With patience and care, you’ll soon enjoy the comfort of your Sleep Number bed in its new home.

Reassemble the Sleep Number bed

Before you dive into the reassembly process, take a moment to ensure all parts of your Sleep Number bed have arrived safely at the destination. A problem-free move doesn’t mean much if you’ve left essential components behind or if any parts have been damaged during transportation. It’s crucial to have the Sleep Number assembly instructions at hands. You may get those on the Sleep Number website, or in a hard-copy manual provided alongside your bed at the time of purchase.

Reassembling your Sleep Number bed is like trying to complete a familiar puzzle. You’ve put it together before, so you have a sense of how the final picture should look. As you’d do with a puzzle – start with the peripheral pieces first, the bed frame. Lay down the deck panels making sure they’re sturdy and secure.

Next, install the foam border walls and position the plastic corner connectors. Be careful as the foam can be delicate and easily damaged. With the frame and border walls securely in place, you can begin installing the air chamber(s) and foam comfort pad.

  • Lay the air chamber(s) within the foam border walls.
  • Connect the air hose(s) to the air chamber(s) and ensure a secure fit.
  • Place the foam comfort pad over the air chamber(s).

Connecting the Firmness Control System is the next step. This is the heart of your Sleep Number bed – the point where your chosen level of comfort is controlled. Follow the instructions in the manual to correctly hook it up. Don’t forget to ensure that the unit has adequate ventilation, and keep it away from dust and debris for optimal functioning.

Finally, cap your setup with the mattress top. Ensuring it is perfectly aligned, zipped up tight, and crisp before you switch on your bed. You are now ready to return to your personalized world of comfort and good sleep.

Remember, reassembling your Sleep Number bed is a patient process. There’s no need to rush. Take the time to ensure each piece fits correctly and securely. Though this process may take time and focus, it’s well worth it. You’ll soon be rewarded with the same comfort you had before the move, now in your new home.


You’ve made it! You’ve successfully navigated the steps to move your Sleep Number bed. Remember, it’s all about being patient and meticulous. From disassembling to reassembling, every step is crucial. You’ve ensured all parts were safe, followed the assembly instructions, and reassembled your bed piece by piece. You’ve connected your Firmness Control System, and now you’re ready to enjoy personalized comfort in your new home. It’s not just about moving a bed; it’s about ensuring your comfort continues wherever you go. So, take a moment to pat yourself on the back. You’ve done a great job! Now, all that’s left is to lay back, relax, and enjoy the comfort of your Sleep Number bed in its new space.

Frequently Asked Questions

What is the initial step in reassembling a Sleep Number bed?

The first step in reassembling your Sleep Number bed is to ensure that all components of the bed have been successfully moved and arrived without any damage. Remember, without the full selection of necessary pieces, you won’t be able to complete the reassembly process.

What are the main components I should look out for?

Key components to keep an eye out for include the bed frame, foam border walls, air chambers, and the foam comfort pad. Ensure that the Firmness Control System is in place, as it is essential for customizing your comfort settings.

How essential are the assembly instructions provided by Sleep Number?

The assembly guide provided by Sleep Number is critical to the reassembly process. The instructions offer step-by-step guidance, making the process manageable and efficient.

How can I ensure successful reassembly of my Sleep Number bed?

First and foremost, be patient and pay attention to detail. Every component has a specific place and role in the bed’s proper functioning. Ensure you attach the mattress top correctly and take your time through each step, viewing it as a rewarding puzzle challenge.

What final step in reassembling should I not forget?

The final step consists of correctly positioning the mattress top. Once this is completed with care, you can enjoy the comfort of your reassembled Sleep Number bed in your new home. The reward of proper reassembly is an unforgettable night’s sleep.